Well: The Basics 

A well is a water source from the ground and is accessed through drilling a hole in the ground. The water is pulled up through the use of pump and pipes. You don’t even have to worry about particles that will cause water contamination because there are screen filters that are installed as well, moreover these filters also helps in making sure the pipes installed will not be clogged. 

You might picture wells the same however they actually vary in sizes as well as shapes. This variation is due to the materials used in making the well and of course of how much water you want to be pumped out. 

Basic Well Types 

  1. Shallow Wells: These types of wells are as the description say, shallow. The depth of this type of well basically ranges from 100 feet or even less. Shallow wells also have a source of water that is unconfined. 
  2. Rock Wells: Rock wells consists of rock formation alone without any soil and is strong enough to a possible collapse. This type of well is drilled through the rock formation as its source. This well has a much deeper depth compared to Shallow wells with a range of 250 feet or less.
  3. Sand Wells: This type of well consist of sand, gravel or clay and soil.  

A successful well construction always starts with having the right location for the well. This can be done by well experts alone because they are more knowledgeable of the area’s hydrology and more than that the regulations that needs to be followed. In order to make sure you can use your well for a long period of time, it is vital that you maintain it just like any other investment or property you own, however a proper construction of your well is always the best way to make sure your well lasts long.  

A well can also be contaminated very easily if it is not constructed properly. If proper construction is not done or practiced, materials that are high in toxicity can make its way to your well and your water. This can be really dangerous especially if the well construction is meant for your drinking needs. However, to make sure your wells are safe for drinking, you can always check for any contaminants or chemicals in the well you own. 

If you are concern of your well make sure you do the following to ensure it is well maintained and safe consumption or usage. 

  1. Maintenance of your well is as important as other things you own in your home that needs maintenance as well. 
  2. Make sure that any hazardous material that can contaminate your well is located far from your well.
  3. Install a covering or well cap in your well to make sure any contaminant will not enter your well.
  4. Conserve your water. 
  5. Learn more about your well and how it is tested to make sure you get quality water.  

If you are in need of an expert’s assistance, well drilling Midland TX can help you with your water well services needs. Connect with them today!  

Submit a Comment

Your email address will not be published. Required fields are marked *